Sand, dust, pollen, leaves and bird droppings can accumulate on solar panels. Rain washes away some of the dirt, but stubborn deposits can sometimes remain. With the right telescopic pole, a soft brush and suitable water, you can clean solar panels from the ground without going onto the roof.
Always check the manufacturer's cleaning instructions and warranty conditions for your solar panels beforehand.
When is the best time to clean solar panels?
It is best to clean solar panels:
- early in the morning;
- later in the evening;
- on a cloudy, cool day;
- when the panels are not hot.
Water evaporates quickly on hot panels, which can cause limescale stains and streaks. Furthermore, a large temperature difference between a hot panel and cold water can cause stress in the glass. A manufacturer such as LONGi advises that the temperature difference between the water and the panel should not exceed 10 °C.
Do not clean the panels during frost, strong winds or thunderstorms. If the panels are damaged, wiring is visible or you see loose connections, stop and call a certified installer.
What do you need?
For safe cleaning from the ground, you need:
- a telescopic pole with sufficient reach;
- a soft, clean brush;
- a low-pressure water hose;
- preferably osmosis or demineralised water;
- optionally a resin cylinder to filter minerals from tap water;
- only if necessary: a suitable, mild cleaning agent approved by the manufacturer.
Mr. Skoon's carbon telescopic poles have an internal water supply and come with a brush, water hose, gooseneck and ball valve with a Gardena connection. The poles are available in lengths of 9, 13.7, 15.5 and 20 metres.
Which length telescopic pole do you need?
Choose a pole that allows you to comfortably reach the furthest panels without constantly extending it to its maximum.
9-metre telescopic pole
The 9-metre 3K carbon telescopic pole is sufficient for many homes. This version is suitable for solar panels on a standard pitched roof and for other work around a normal home.
13.7-metre telescopic pole
Are the panels higher or further from the roof edge? Then the 13.7-metre telescopic pole offers extra reach. This length is suitable for high freestanding homes, larger dormer windows and higher roof sections, among others.
15.5 or 20-metre telescopic pole
For taller buildings, large installations and professional use, versions of 15.5 metres and 20 metres are also available.
Unsure about the right size? Then check our guide: Which length telescopic pole do I need?.
Which brush is suitable for solar panels?
Use only a soft, clean brush that is suitable for delicate surfaces. A soft nylon brush removes dirt without requiring much force. Mr. Skoon's professional nylon brush has soft side bristles and is suitable for use with our water-fed telescopic poles.
Check the brush before every cleaning session. A grain of sand, small stone or other hard particle between the bristles can cause scratches when moved over the glass. Therefore, do not place the brush on the ground and do not use it on solar panels after you have used it to clean heavily soiled facades or paving.
Never use:
- a steel brush;
- a scouring sponge;
- a hard floor brush;
- a knife or scraper;
- abrasive materials;
- a dry, dirty cloth.
Manufacturers recommend soft brushes, soft sponges or non-abrasive cloths and warn against metal and abrasive tools.
What water should you use?
Clean water is often sufficient for light soiling. However, tap water contains minerals, including calcium and magnesium. When the water dries, these minerals can leave limescale stains on the panels.
For a result with fewer stains, preferably use osmosis or demineralised water. With the Mr. Skoon 5-litre resin cylinder, you filter out limescale and other dissolved minerals from tap water. The cylinder is placed between the tap and the telescopic pole and filters approximately 500 litres according to the product specification at an average water quality of 300 ppm. The actual consumption depends on the local water quality.
Do you not have filtered water? Then work when it is cool, rinse thoroughly and prevent mineral-rich water from drying quickly on hot panels.
Do you need a cleaning agent?
For dust, pollen and light deposits, water is often sufficient. Use cleaning agents sparingly: they can leave residue or damage the coating, seals and aluminium edges.
Do not use:
- all-purpose cleaner without checking its suitability;
- washing-up liquid;
- abrasive materials;
- aggressive degreaser;
- bleach;
- acidic or strongly alkaline cleaner;
- solvents such as thinner or alcohol.
Is water alone insufficient for stubborn bird droppings or greasy deposits? Then first check which cleaner is permitted by the manufacturer of your solar panels. Use only a mild, non-abrasive agent in the prescribed dosage and rinse the panel thoroughly.
A soap dispenser can mix cleaning agent with water in a controlled manner, but only use it on solar panels if the chosen agent is suitable according to the panel manufacturer. In many cases, filtered water and a soft brush are preferred.
Cleaning solar panels in seven steps
1. Check the panels from the ground
Look for cracks, loose parts, visible wiring or other damage. Do not clean damaged panels yourself.
2. Read the manufacturer's instructions
Check which cleaning agents, brushes, water quality and working methods are permitted. Also follow the prescribed procedure for safely switching off the installation. Solar panels can continue to generate voltage in daylight.
3. Check the working environment
Ensure a stable, level and non-slip standing position. Keep children, pets and passers-by away. Pay extra attention to electrical cables and other obstacles.
4. Rinse away loose dirt
Rinse the panels gently with low-pressure water. This removes sand and dust before you brush over the surface.
5. Let stubborn dirt soak
First thoroughly wet bird droppings or dried dirt. Do not try to scrape it off dry. Let the water work in and repeat this if necessary.
6. Brush with light pressure
Move the soft brush gently over the panel. Let the brush and water do the work. Hard pressure is not necessary and can make the pole harder to control.
7. Rinse thoroughly
Rinse away loosened dirt and any residue completely. When using osmosis water or water from a resin cylinder, the surface usually dries without the need for rubbing.
Important safety risks
Do not go onto the roof unnecessarily
A wet and pitched roof poses a serious fall hazard. Choose a telescopic pole that allows you to work from a safe position on the ground. Cannot reach or control the panels properly? Then have a professional carry out the cleaning.
Carbon conducts electricity
Mr. Skoon's 3K carbon telescopic poles are lightweight and rigid, but carbon is electrically conductive. Keep the pole well away from overhead cables, exposed wiring and other electrical sources. Never use the pole during thunderstorms.
Do not use a pressure washer
A powerful water jet can damage seals, connections or the surface. Use a normal water hose or a water-fed brush at low pressure and always follow the maximum pressure prescribed by the panel manufacturer.
Do not walk or lean on solar panels
Standing or leaning on them can cause invisible cracks in the solar cells. The frame and mounting can also be stressed. Therefore, work from the ground and prevent the telescopic pole from coming hard against a panel.
Common mistakes that can cause scratches
Most damage is not caused by the soft brush itself, but by dirt or incorrect use. Therefore, avoid these mistakes:
- dry brushing while there is sand on the panel;
- using a brush that contains sand or small stones;
- using a scouring sponge, squeegee with damaged rubber or hard brush;
- scraping off dried bird droppings;
- applying too much pressure;
- bumping the metal gooseneck or connection against the glass;
- placing a dirty brush on the ground and using it again immediately;
- applying aggressive or abrasive cleaning agents.
Always rinse away loose dirt first and keep the brush clean during the work.
Get started safely yourself
With a lightweight telescopic pole, a soft brush and suitable water, you can safely clean many solar panels from the ground. View the Mr. Skoon 3K carbon telescopic poles or first determine which length suits your home.
Unsure about the right telescopic pole, brush or water treatment? Email info@mrskoon.nl or send a WhatsApp message via the button on our website. We are happy to help you think it through.
